Remote Control 1P Single Axis Tracker Controller Long Lifespan
The single axis solar tracker controller is based on an internal dynamic calculation of the solar sunrise and sunset time. After this data is achieved, it calculates the target angle of the panel. This control action is repeated for every specific time interval from sunrise to sunset. Note that this unit does not depend on the time the actuator is ON but instead tends to turn the panel to the correct angle. This ensures that even if there is any deviation of the panel angle at any point of time due to external intervention or through the manual mode of the unit, the unit will recover the panel automatically in the next control cycle. The unit also provides setting of various parameters to the user thus making the unit extremely flexible and can be adapted by the user for different environments much easily.
Advantage:
1. Tailor made tracker solutions to suit site requirement
2. Centralized astronomical tracker controller
3. Lowest energy consumption for tracking
4. Optimized for maximum yield within minimum area
5. Protection mechanism against specified wind speed
Product info:
1. Lowest and optimized production cost
Through project design, the engineers help to offer simplest assembly and rapid installation results in costs and efficient construction schedules.
2. Minimum annual power consumption
During the overcast sky, the Good future solar tracker will move the horizontal position to absorbed all the diffused light.
3. Low maintenance and Outstanding longevity
The drivers will move the solar panel to slow position automatically at high wind speeds, this will protect the system from over-travel and increased solar system service life. The simple and robust design requires minimum maintenance.
Functions:
1. Max terrain tolerance in N-S direction up to 15%.
2. Excellent compatibility with all the solar modules available on the market, framed, frameless and bi-facial.
3. Independent 2P module design, which reduces the quantity of posts and the installation cost significantly.
4. Free obstacles among trackers in N-S direction, easy to maintain and clean.
5. Design configured with one single set of controller, which ensures point-to-point real-time monitoring, easy to detect fault points in time and reduce output loss.
Technical Parameters of Remote Control 1P Single Axis Tracker Controller Long Lifespan
| Technical parameters |
| Tracking Range | 士 60° |
| Driving System | Slew drive, 28VDC motor |
| Modules per Tracker | Max.90 modules per tracker |
| System Voltage | 1000 V or 1500 V |
| Ground Coverage Ratio | ≥ 25% |
| Foundation Options | All foundation types |
| Standard Design Wind Speed | 18m/s |
| Module Supported | All commercially available modules |
| Operation Temperature | -40℃ - 70℃ |
| Control Algorithm | Astronomical algorithms + Tilt sensor close loop |
| Tracking Accuracy | ≤ 1° |
| String-Powered | Yes |
| Backtracking | Yes |
| Communication Options | LoRa wireless /RS 485 cable |
| Night Position | Yes |
Product Tags:
|
|
SGS Automatic 1P Single Axis Tracker Controller Remote Control Images
|
